madas燃?xì)膺^濾器FM型保養和維護正確方法
更新時間：2017-12-20 點擊次數：1832次
madas燃?xì)膺^濾器FM型保養和維護正確方法
意大利MADAS馬達斯燃?xì)膺^濾器保養和維護方法
1. 日常維護、保養
1)經常保持設各表面清潔。
2)設備停車時，應及時按規定對快開盲板 (法蘭蓋)的各個轉動進行潤滑，開閉部位的絲杠，應涂潤滑油脂. 其它部位也盡量涂潤滑油脂. 對于無法涂潤滑油脂的部位，可注 10#或20#機油。
2. 運行時的維護、保養
1)建議由操作者負責設備平時的維護保養.
2)經常保持設備表面清潔。
3)隨時監測差壓計讀數，當使用壓差達到0.O2Mpa時，應沖洗濾芯。
3. 檢驗周期
1)本設備的定期檢驗必須嚴格按照"容規"第六章的有關規定進行。
2)每年至少對本設備進行一次全面檢驗、設備壁厚的測雖，每兩年對設備的承壓焊縫進行無損檢測。所有的檢驗、檢測結果，應記入設備的技術擋案。
3)設備內部有壓力時. 不得進行任何維修。對于特殊情況下的維修. 必須嚴格遵守"容規"第 122條的規定進行。
4. 長期停放時的維修保養
1)本設備長期停放時. 應將設備內液體排凈。
2)關閉所有閥門。
3)將設備表面*清理干凈。
4)所有轉動部位涂防油脂。
5)用帆布將設各全部蓋上，防止塵垢沉積在設備表面。
madas燃?xì)膺^濾器FM型保養和維護正確方法
FMC - FM - FGM
P.MAX 2 - 6 BAR
It is a device that prevents the passage of a particles of dust or debris brought by the gas, protecting the regulation and safety device.
FM gas filters have a large filtering component made of synthetical washable material which is fully removable for complete inspection and cleaning.
MADAS filters permits upstream pressure measurement through an appropriate standard connection.
Reference standard EN 126
In conformity with:
2014/68/EU PED Directive
(ex 97/23/EC)
Direttiva Gas 2009/142/CE
madas燃?xì)膺^濾器FM型保養和維護正確方法
FMC - FM - FGM
P.MAX 2 - 6 BAR
It is a device that prevents the passage of a particles of dust or debris brought by the gas, protecting the regulation and safety device.
FM gas filters have a large filtering component made of synthetical washable material which is fully removable for complete inspection and cleaning.
MADAS filters permits upstream pressure measurement through an appropriate standard connection.
Reference standard EN 126
In conformity with:
2014/68/EU PED Directive
(ex 97/23/EC)
Direttiva Gas 2009/142/CE
